Hard Chrome Plated Bar - Hard Chrome Rod

The Hard Chrome Plated Rod suitable for Hydraulic cylinder, Machine Tie Bar, Auto Cylinder Piston Rod and any others Auto Machine Parts.The Rods can be application for Join Pen, High-Strength Screw, Bolting, Sliding Bar and Auto Parts.For Plastic Machines parts: Main Rods, Screw Bars and Feeding Bars.Features:

Product ID: HCR-SCM440

• Alloy steel subject to End-Quench Harden ability Requirements SCM440 has better Tensile Strength, Yields Strength and Elongation then Hard Chrome Plated Steel
• With Chromium and Molybdenum Alloy, the steel has better Harden ability and mass effect to get high Toughness and low Brittleness.
• After Induction Hardness dispose, the surface hardness could be HRC 55 +/- 2

Hard Chrome Bars - Hard Chrome Shaft

• External Diameter Accuracy: f8
• Surface Roughness:Ra0.2~0.4um
• Hard Chrome Plated Thickness:20 Micron +/-10%
• Surface Hardness:HV 800 Min.
• Material :JIS SCM 440 / DIN 42CrMo4 / AISI 4140

Cylinder Piston Rods Specification

• External Diameter Accuracy: f8
• Surface Roughness:Ra0.2~0.4um
• Hard Chrome Plated Thickness:20 Micron +/-10%
• Surface Hardness:HV 800 Min.
• Material :SAE 1045 / DIN CK45 / JIS S45C

Induction Hard Chrome Plated Bar

Induction Hard Chrome Plated Bar: The Rods can be application for Pneumatic / Hydraulic Cylinder Rods, Crumb, Plastic Injection Machines, Fitness Equipment, Linear Motion Shaft, Slide Rail, and various kinds of Precision Mechanical, Auto-machines Parts.
Features:

• The rods made by SAE 1045/JIS S45Cmaterial, with hardened by Induction, Heat treatment and Hard Chrome Plated.
  
• A deeper Hardening Depth and higher uniform.
• After Induction Hardened, the surface harden cab be HRC 54 +/- 3
• The surface Hard Chromium Plated, and the Roughness under RZ1.2
  

Chromium Rod

• External Diameter Accuracy: f8 , g6
• Surface Roughness:Ra0.2~0.4um
• Hard Chrome Plated Thickness:20 Micron +/-10%
• Surface Hardness: HRC 54 +/- 3
• Material :SAE 1045 / DIN CK45 / JIS S45C